The author’s rooted Redmi 13C 5G talks over USB‑C to the LED controller, showcasing the phone‑based alternative to a Raspberry Pi setup.
*Old Redmi and Huawei phones on the second‑hand market deliver high‑resolution cameras, GPS, storage and 5G for as little as ¥300–500, undercutting a fully equipped Raspberry Pi rig by more than half.*
A maker building a high‑resolution camera rig faces a familiar dilemma: assemble a Raspberry Pi 4 with a 64 MP Arducam, GPS HAT, storage, UPS, touchscreen and cellular modem, or repurpose an old smartphone that already contains most of those parts. The author’s cost spreadsheet shows a used Redmi 13C 5G or Huawei Mate 30 5G on Taobao for ¥300–500, versus a fully equipped Pi build that tops ¥2,300. The phones bring 50 MP and 40 MP cameras, GPS, 5G data, a battery and a touchscreen out of the box. By rooting the Redmi and testing its camera, the author proved the device can sleep, wake on schedule and interface via USB‑C to a custom light‑controller PCB. The question now is whether supply can keep pace if the approach scales beyond a single prototype.
The author compared a rooted Redmi 13C 5G and a Huawei Mate 30 5G against a Raspberry Pi 4 build. Both phones sell for ¥300–500 on Taobao, delivering a 50 MP JPEG camera (Redmi) or a 40 MP main sensor with telephoto (Mate 30). The Pi approach requires a separate 64 MP Arducam (~¥400), a GPS HAT (~¥153), a 64 GB microSD (~¥50), an RTC HAT (~¥80), a UPS HAT (~¥133), a 5″ touchscreen (~¥247) and a 4G cellular HAT (~¥527). Adding these components pushes the Pi total to ¥2,317, roughly eight times the phone price. The phones already include GPS, storage, a clock, a battery, mobile data and a touchscreen, eliminating the need for most add‑ons.
Illustrative November 2026 listings list the Redmi or Mate 30 at ¥300–500, while the Pi 4 4 GB board alone costs ¥880. The camera module for the Pi adds ~¥400, GPS HAT ~¥153, storage ~¥50, RTC HAT ~¥80, UPS HAT ~¥133, touchscreen ~¥247 and 4G HAT ~¥527. Summed, the fully equipped Pi totals ¥2,317. In contrast, the phone’s built‑in components cover every function the author needs for the project. Even after accounting for a UPS HAT and batteries, the phone solution remains under ¥600. The price gap widens further when scaling to multiple units, as sourcing dozens of identical phones is far simpler than acquiring matching Pi accessories.
The Redmi’s 50 MP JPEG output and the Mate 30’s 40 MP sensor meet the high‑resolution camera need. Both devices ship with 5G radios, offering faster mobile data than the Pi’s 4G HAT. The author has already rooted the Redmi, verified camera operation, and scripted sleep‑wake cycles. The Huawei, while harder to root, runs a kiosk app. USB‑C ports provide a direct link to the custom light‑controller PCB. The phones also include built‑in clocks, batteries and storage, removing the need for separate RTC or UPS modules. The author plans side‑by‑side photo tests to compare detail between the Redmi and the Arducam, acknowledging that a 50 MP JPEG alone does not settle image quality.
Second‑hand markets on Taobao regularly list functional Redmi 13C 5G and Huawei Mate 30 5G units for ¥300–500. Finding two good phones is trivial; locating a few hundred with healthy batteries and predictable camera behavior would require more effort but remains feasible. The abundance of these devices means galleries could receive a pre‑configured phone instead of a Pi or Mac mini, simplifying deployment. Mobile data and remote access eliminate the need for Wi‑Fi privileges or open ports. This reuse model leverages the scale of smartphone production to cut costs and streamline logistics for digital artworks and installations.
A used Redmi 13C 5G sells for ¥300–500, while a Raspberry Pi 4 4 GB board alone costs ¥880.
The Redmi captures 50 MP JPEG images.
Yes, both the Redmi and the Mate 30 have built‑in GPS and 5G mobile data.
If the experiment confirms that a repurposed smartphone can match or exceed the performance of a bespoke Pi rig, the economics of DIY imaging shift dramatically. Galleries and installers could ship a single, pre‑configured phone instead of a bundle of modules, cutting hardware spend, simplifying setup and leveraging ubiquitous mobile data. The model also hints at a broader trend: mass‑produced consumer devices becoming the backbone of low‑cost, high‑capability custom hardware. The author’s next step—direct image comparison—will determine whether the savings translate into usable quality, but the financial case is already clear.
Sources: [Hacker News – Why get an expensive Pi when I have an old phone?]